Посмотрел на список "трубсетов" - http://www.equusbicycle.com/bike/columb ... -tubes.jpg ,вроде все понятно.
Смутила и убила надпись Tre Tubi. На форумах нашел вот что:
"Tre tubi means only the three main tubes are Columbus, and almost certainly straight gauge unless specifically marked otherwise. The stays and fork are generally high tensile steel (gas pipe).
Tre tubi was at the bottom of the quality scale.
Aelle tubing was considerably higher than tre tubi. Aelle was, like Reynolds 531, a manganese alloy and not the same Cro-mo alloy of the SL/SP. Aelle was available in tre tubi (cheapest), straight quage (middling) and butted tubing (top of the line). Some builders preferred to use butted Aelle tubing for certain applications and in reality it is often unfairly maligned. I have always wondered if Columbus ranked teh Aelle tubing as "cheaper" as a sort of dig at Reynolds, as Reynolds too is a Manganese alloy."
Голова закипела и отказывается соображать: получается, что рама сделана "кем-то", используя 3 основные трубы Columbus Aelle? Или вся рама колумбусовская (на дропауте, кстати, выбито "columbus").
Уважаемые, помогите пожалуйста разобраться.
Это легированная сталь?
